Punic Wax (400 g)
$25.50
Punic wax is a matte or glossy (after polishing) finish coat for high finish lime plasters such as Stucco Fine, Marmorino or Tadelakt.
WINTER DELIVERY NOTICE: Due to the frost sensitivity of our liquid products, please contact us before placing an order if delivery is required outside the Greater Montreal area.
| Format | Consumption | CAD $ |
|---|---|---|
| 400 g | Approx.150 ft² | 25.50 |
In stock
Description
Punic wax is a matte or glossy (after polishing) finish coat for high finish lime plasters such as Stucco Fine, Marmorino or Tadelakt. It is water soluble, making it easy to use with a brush or spatula. It can also be applied on natural paint to make the surface dirt resistant or to create various decorative effects.
Application
When using the product, the complete product information must be observed.
USE
Punic Wax is a glossy finish coat for:
– Stucco Fine, Tadelakt, Marmorino and 0.5 mm lime plaster
– Marbled effects (e.g. milk paint)
– Encaustic
– Casein paint
It is also used as an additive in casein paint to:
– obtain spatulate effects
– do stencil decoration
– create a glossy finish
APPLICATION
On Marmorino, Stucco Fine, 0.5 mm lime plaster: Apply the Punic Wax undiluted with a Venetian spatula or a Steel Trowel in one or more thin layers. Apply only to surfaces previously treated with Marseille soap. After drying, polish with a Venitien trowel to smooth out.
On Tadelakt: Apply the Punic Wax undiluted in a thin coat with a ball-rolled cloth, and buff immediately with a clean, dry, soft ball-rolled cloth. Apply only to surfaces previously treated with Marseille soap.
Marbled effects: On marbled effects made with Milk Paint, for example, apply the Punic Wax in a thin layer with a trowel. To obtain an even shine, polish after drying with a soft cloth, a horsehair brush, or a polishing machine (be careful, too much pressure and RPM can damage the surface due to the heat). The Punic wax coating gives the treated surface depth and transparency effects reminiscent of real marble.
Polishing wall paint: By adding 15% Punic wax to Milk Paint (0.75 kg of Punic wax for 5 kg of powder) or a tempera, a beautiful satin shine is obtained after drying and polishing. Mix the wax only in the already mixed paint, and after its resting time.
DRYING TIME
Approximately 5 – 6 hours at 20 °C.
CLEANING OF TOOLS
Clean immediately after use with lukewarm water, possibly with Marseille soap.
Technical Data
It should be noted that the yield may vary depending on the substrate, the application method and the quality of the surface. Determine exact consumption by testing.
Before using this product, consult its Technical Data Sheet
Product Safety Data Sheet
