Auro White Gloss Coating Lacquer decorates and protects interior wood such as furniture, doors, frames, moldings or toys. The gloss lacquer can also be used for exterior applications. It can be diluted with water and covers approximately 137 ft²/litre per coat depending on the quality of the support and the application.
When using the product, the complete product information must be observed.
– For decoration and protection (diffusion capacity) of wood, derivatives and ferrous metals.
– Indoors and outdoors, at least 2 coats with a minimum of 0.08 L/ m2, per coat.
Brush (synthetic or mixed bristle brushes, fine pore foam sleeves), roller (short nap lacquer rollers), spray.
METHOD OF APPLICATION
After interior or exterior surfaces have been prepared and primed, apply at least two coats of lacquer. Respect a total consumption of at least 0.24 L/m2, for an optimal protection on smooth and regularly absorbing support.
Depending on the type of substrate and quality, it is recommended, when a coat is dry, to sand the substrate lightly with fine sandpaper (220 grain) or a sanding felt, without damaging the corners, and to remove dust before applying the next coat.
DRYING TIME IN NORMAL CLIMATE CONDITIONS (23°C / 60% relative humidity)
– Touch dry in approximately 10 hours, dry and coatable in approximately 24 hours, completely dry in approximately 5 days.
CLEANING AND CARE OF SURFACES
Clean surfaces with lukewarm water only. Do not use bases (such as alkaline or ammonia-based solutions), or highly abrasive cleaning agents.
CLEANING OF TOOLS
Clean tools immediately after use with a vegetable soap (e.g. Marseille soap). It is advisable to impregnate the bristles of brushes and paintbrushes with a vegetable soap before storing them, and to rinse them thoroughly with water before using them.
It should be noted that the yield may vary depending on the substrate, the application method and the quality of the surface. Determine exact consumption by testing.
Before using this product, consult its Technical Data Sheet available below:
Technical Data Sheet